NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.04
02/17/2023

Legally-Relevant Changes:
•	Add Australia mode to regulatory parameters


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.03
02/03/2023

• 	Add support for new widget with monospace font


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.02
11/22/2022

• 	Menu – When Spanish is selected, some values are overlapping in the menu
• 	Menu – Remove button overlapping with linear point value
• 	iQube2 – Section tweak does not allow selection of a section
• 	iQube2 – Add “Please Wait” message for full tweak operation
• 	iQube2 – Corner tweak loadcells do not populate
• 	EDP – 1280 not accepting old command for font selection
• 	Setpoint – Restart issue when going into UI label bound to a setpoint

NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.01
10/20/2022

• 	Adding core capability to display/handle scale card errors
• 	Adding new text label font

NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.00
06/06/2022

Non-Legally-Relevant Changes:
•	iQube 2 Diagnostics – Deadload info added to cell
•	Total Scale – Allow iQube child scales in industrial mode
•	UI Email Config Menu – Add SMTP to server address and server port text
•	GetDigout and GetDigIn commands doesn’t respond with correct syscode
•	Setpoint timer functionality bug
•	New total scale parameters for UI
•	iQube 2 error messages missing data
•	FTP- correct ftp user password from always being set – even when not enabled
•	Diagnostics – iQube 2 cell error and emulation color not clearing 
•	UI – Make fieldbus slots hardware dependent
•	Add iQube 2 diagnostics to flyout keyboard in red bar
•	Setpoint – Time of day value does not save when edited from weigh mode side bar
•	Display status line is in wrong location 12inch display
•	PERFMODE command can respond with incorrect setting
•	Keyboard lock – motion can bypass keyboard lock
•	iQube 2 – Blue menu doesn’t show config pages after the first
•	iQube 2 – Exiting and re-entering setup mode causes nav bar to lockup
•	UI – Leaving iQube 2 configuration menu exits to black screen
•	Setpoints – percent relative SPs add their value to the source SP value
•	Add new config item to enable/disable the TCP/IP EDP command server
•	Contact Info – string length mismatch between UI, EDP command, revolution
•	Diagnostics screen bug
•	Email core – email username portion does not allow more than one period
•	Save and exit touch screen area is inconsistent
•	Setpoint access from the run screen does not function for more than on SP
•	Print – headers don’t print in the correct position in a line and include extra NL
•	Print token – SP name token does not print anything
•	iQube 2 logo glitches when pressed
•	iQube 2 live diagnostic screens cosmetic issues
•	UI – Option to set units for program scale
•	iQube 2 – Adjusting too quickly on corner tweak zeroes load cell weight
•	UI – Unlock calibration values button missing
•	iQube 2 – Live diagnostics screen
•	12” display iQube 2 diagnostics screen can’t scroll right
•	Audit trail UI
•	Stream format <W07> behaves like <W07.> token
•	OIML – SC.OVERLOAD default should be FS+9D, not FS+2%
•	Calibration – Temp zero calibration via EDP does not work
•	Calibration – Last zero calibration via EDP does not work
•	Accumulator value is occasionally being reset
Legally-Relevant Changes:
•	Total scale options for countby


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.04.03
02/01/2022

•	External keyboard occasionally causes the scale widget to report dashes
•	TCP/IP connections closing when large amounts of data are being transmitted 


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.04.02
12/10/2021

•	Allow iQube2 scales to be part of a total scale 


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.04.01
11/19/2021

•	iQUBE 2 diagnostic screen correction load cell emulation


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.04.00
11/12/2021

Non-legally relevant changes:
•	Overload and Underload characters adding one more character to the W7 token 
•	LockKey() iRite API function does not stop keypad tare operation after being called 
•	DIO do not change state when iQube 2 or serial scale lose communications 
•	GetLCCD() iRite API function does not work for iQube2 scales 
•	GetWVAL() iRite API function returns zero for iQube2 scales 
•	GetCountby() iRite API function always returns zero for total scales
•	Fieldbus not producing any data, and is not communicating properly 
•	Onboard CPU temperature sensor not working properly 
•	iQube 2 to 1280 communications issue using Lantronix ethernet to serial module 
•	iQube 2 cancelling calibration requires exiting config 
•	iQube 2 display live weight during calibration 
•	TCP connections are not discarding data when there is no client connection 
•	1280 UI iQube 2 secondary units shows a non-functioning multiplier 
•	IRite program load to update new counter and show on UI 
•	iRite chart render and ChartInsertToExisting() can’t call multiples in sequence 
•	Web display – chart widgets will not display in browser 
•	Add Chinese translations 
•	Network Port 1024 not allowed to be configured as client 
•	Alert history viewer added 
•	iQube 2 – Diagnostic screen UI changes 


Legally relevant changes:
•	CoZ bug when scale is set to Canada regulatory mode 
•	Multi-interval range selection should be based on display weight 