AutoLift HE Hostile Environment Floor Scale

As of: Friday, June 27, 2025

Save or Print to PDF

Standard Features

Includes scale, pit frame, pit coping and pneumatic control box
Rugged washdown design
304 stainless steel construction
Rigid 304 stainless steel channel frame
Meets HACCP requirements
Manual, drop-in-place, safety bar
Four stainless steel, hermetically sealed, IP69K shear beam load cells
Load cells protected on all four sides
20 ft of SURVIVOR® hostile environment load cell cable
Smooth stainless steel deck
Four adjustable stainless steel SUREFOOT™ support feet
Requires 85 to 100 psi air pressure, opens 43 degrees
Air lines and pneumatic regulator included; conduit for load cell cable from junction box to indicator is not included

Approvals

WARNING: Cancer and Reproductive Harm California Proposition 65

Heavy-duty Washdown Floor Scale

With its pneumatic lifting arm, the low-profile AutoLift HE floor scale improves efficiency and safety by providing hands-free access for washdown demands. The TuffSeal® JB4SS stainless steel NEMA Type 4X junction box can be remotely mounted up to ten feet from the scale, keeping sensitive electronics far from damaging chemicals and moisture.

All Rice Lake floor scales, unless specified otherwise, are built with lifting holes to assist our dealers during installation or at later service the scales.

AutoLift HE Low-Profile Lift Floor Scale Specifications

End Load Capacity:
100% full scale at 2,000 lb and 5,000 lb
80% full scale at 10,000 lb

Cable Length:
20 ft (6.1 m)

Scale Weldment:
AISI304L, glass bead blasted for even appearance

Junction Box:
TuffSeal® JB4SS stainless steel, NEMA Type 4X junction box with signal trim card

Welding:
Stitch, consult factory if continuous is required

Threaded Eyebolt:
Hole (1/2-20 NF) located in center of deck for easy lifting

Warranty (limited):
Weldment: Five-year
Load cells: Two-year
All other components: One-year

Approvals:
NTEP 92-001
Measurement Canada
FM

Parts

Part #	Description

42207	Scale,Pneumatic Lift ASSY 4x4HPSSP-2K 2,000 lb NTEP III SST
42208	Scale,Pneumatic Lift ASSY 4x4HPSSP-5K 5,000 lb NTEP III SST
42209	Scale,Pneumatic Lift ASSY 4x4HPSSP-10K 10,000 lb NTEP III SST
42211	Scale,Pneumatic Lift ASSY 5x5HPSSP-2K 2,000 lb NTEP III SST
42212	Scale,Pneumatic Lift ASSY 5x5HPSSP-5K 5,000 lb NTEP III SST
42213	Scale,Pneumatic Lift ASSY 5x5HPSSP-10K 10,000 lb NTEP III SST

Options

Part #	Description

28740	Floor Stand,Indicator SST (36.3in) For 120/120 Plus, 882IS/882IS Plus, 882IS/882IS Plus w/battery, 880/880 Plus, 480/480 Plus, 482/482 Plus, 680/682 Synergy, 380/380X Synergy
Consult	Four drilled deck holes for scale height adjustment