IQ Plus® 2100 Digital Bench Scale

As of: Thursday, August 13, 2026

Standard Features

304 stainless steel construction
Large LED display
Two digital inputs for remote zero, print and units
12 in column, attachment bracket or tilt stand for table, wall or under counter mounting
Aluminum, single-point load cell
Overload and upload stops on scale base
Stainless steel, non-tactile feel, piezo zero and units buttons
Unit of measure: kg, g, lb, oz, lb/oz (lb/oz is not Legal for Trade)
PreVent™ breather vent
Factory calibrated

Approvals

WARNING: Cancer and Reproductive Harm California Proposition 65

Unmatched Features and Value

The IQ plus® 2100 digital bench scale is ideal for use in general purpose weighing, portioning, and a variety of food processing applications. Stainless steel buttons repel messy ingredient spills and damage by knife point, while the NEMA Type 4X stainless steel indicator enclosure stands up to frequent washdowns. Standard overload stops protect the base during heavy use. All operations are controlled through two buttons—zero and units. Push-button zero and a full range of units, including lb/oz, offer the flexibility needed for a wide variety of applications.

IQ plus 2100 Digital Bench Scale Specifications

Power:
Line Voltage 115 VAC

Frequency:
50/60 Hz

Power Consumption:
70 mA at 115 VAC (8 W)

Display Resolution:
10,000 graduations max

Digital Inputs:
Two inputs, TTL or switch closure, active-low

Scale Frame:
AISI304L, straight line finish, Ra=45 ± 10

Scale Cover:
AISI304L, straight line finish, Ra=45 ± 10

Serial Communications:
Full-duplex RS-232; 9600, 4800, 2400, 1200 bps; seven or eight data bits; even, odd or no parity

Display:
Six-digit light-emitting diode (LED) display
Seven-segment, 0.8 in (20 mm) digits

Annunciators:
Negative value, center of zero, motion, kg, g, lb, oz

Keypad:
Two stainless steel piezo switches

Operating Temperature:
14 °F to 104 °F (-10 °C to 40 °C)

Rating/Material:
NEMA Type 4X/IP66
Stainless steel

Load Cell:
Aluminum, environmentally sealed

Warranty:
Two-year limited

Approvals:
Indicator:
NTEP 00-045 Class III/IIIL 10,000 d
Measurement Canada AM-5374
cULus Listed
Base:
NTEP 95-072, Class III 5,000 d

IQ Plus 2100 Digital Bench Scale Dimensions

Platform Dimensions	L	L1
10 × 10 in	10.25 in	10 in
12 × 12 in	12.25 in	112 in
Note: 1 in = 25.4 mm

www.ricelake.com | 800-472-6703