SCT-10 Signal Conditioning Transmitter

As of: Monday, November 3, 2025

Save or Print to PDF

Standard Features

Converts digital weight to analog output
Sums four input channels in parallel
Theoretical calibration, real-weigh calibration, linearity calibration
Push-button or preset tare
Full-scale analog output with zero setting and PLC correction of analog signal
Displays weight, configuration, calibration and error conditions
DIN-rail mounting, suitable for back panel
Two digital inputs, two digital outputs
Supports ASCII or Modbus RTU protocols

Approvals

WARNING: Cancer and Reproductive Harm California Proposition 65

Maximize Control With a Digital Weight Transmitter

Quickly convert digital weight to analog data with the SCT-10 signal transmitter. Theoretical, real-weigh and linearity calibration allow operators to easily calibrate connected scales remotely. A compact display provides weight, configuration, calibration and error conditions to monitor load cell performance constantly.

SCT-10 Signal Conditioning Transmitter Specifications

Power:
Input: 12 to 24 VDC

Power Consumption:
5 W

Excitation Voltage:
5 VDC, 120 mA, 8 × 350 ohm load cells

Analog Signal Input Range:
± 19.5 mV

Analog Signal Sensitivity:
0.3 μV/graduation minimum
1.0 μV/graduation recommended

A/D Sample Rate:
80 Hz

Resolution:
Internal: 16,000,000 counts
Display: 999,999

System Linearity:
± 0.01% full scale

Digital I/O:
2 inputs 5-24VDC, 2 outputs
24 VDC/60 mA
N.O. or N.C. (solid state)

Communication Ports
RS-485 or RS-232 simplex supports up to 115,200 bps

Analog Output:
Opto isolated, 16 bit
0-20 mA, 4-20 mA (max 300 ohm)
0-10 VDC, 0-5 VDC, -10 to 10 VDC, 5 to 5 VDC, (min 10 k ohm)

Annunciators:
Net, center of zero, stability, kg, g, lb

Display:
0.3 in (8 mm), six-digit, seven- segment LED

Keys/Buttons:
4-key membrane panel, tactile feel
Zero, Tare, Print, Menu, Escape,
Left and Up Navigation, Enter

Dimensions:
(L × W × H)
DIN Rail Mount: 4.84 × 3.62 × 1.96 in (123 × 92 × 50 mm)
Enclosure: 6.69 × 5.51 × 3.74 in (170 × 140 × 95 mm)

Temperature & Humidity:
Operating Temperature: -4 °F to 140 °F (-20 °C to 60 °C)
Humidity: 85% non-condensing

Rating/Material:
DIN rail mount: NEMA Type 1
Enclosure: NEMA Type 4/IP67, plastic
Clear cover: six PG9 cord grips

Weight:
1 lb (0.5 kg)

Warranty:
One-year limited

Approvals:
cULus Recognized

Parts

Part #	Description

129393	Indicator,Convertor SCT10 SCT10-AN, 12-24VDC, Analog Output, and RS485/232 Serial Port DIN Mount, SCT-10
129394	Indicator,Convertor SCT10 SCT10-AN, Enclosed in Plastic Junction Box, 12 -24VDC, Analog Output and RS485/232 Serial Port. SCT-10

Options

Part #	Description

131129	Lit,Manual SCT 10 Series Sct Weight Transmitter
199687	End Clamp, Left and Right set with Clip for DIN 35 Rail for SCT-10 SCT-30
88792	Power Supply,IDEC 12VDC DIN Rail Mount, 1.3 Amp, Input: 85 to 264 VAC, 100 to 370 VDC 15W
119244	Power Supply,24VDC 1.3A Din Mount Input 90 to 264VAC,120 to 370VDC, UL E135494