SCT-2200 Signal Conditioning Transmitter

As of: Thursday, June 19, 2025

Save or Print to PDF

Standard Features

HUB mode connects up to 16 transmitters to one fieldbus
Two RS-485 port for "daisy-chain" network connection
Quick menu for real and theoretical calibration
Remote access through web browser for weight monitoring and calibration over EtherNet/IP, Profinet and Modbus TCP network
Red LED display
DIN rail mountable
Calibration using linearization points
Reading of the net, gross and tare weights, clearing, semi-automatic and presettable tare setting of outputs application thresholds
Diagnostic information via serial port, message display, printing, simulation of key pressure, Modbus RTU or ASCII protocol
Printer management on second serial port available
Multi-range function allows for subdividing the scale capacity in two, each up to 3,000 divisions
Easy configuration with Rice Lake Tools software

Approvals

WARNING: Cancer and Reproductive Harm California Proposition 65

CONTROL IN MINIATURE

For PLC systems that require weight data from a scale, Rice Lake’s compact SCT transmitters deliver equivalent signal-conditioning function without the cost or bulk of a full size weight indicator/controller. Rice Lake's SCT-2200 is DIN Rail mountable within a cabinet or control panel, where it converts a scale’s load cell signals to analog output, serial output, or a specific network protocol. Unlike many other signal transmitters, the SCT-2200 has its own 0.3 inch weight display, with annunciators for unit and weighing status, and push buttons for zero, tare and setpoint entry, simplifying scale setup, calibration and operation.

BUILT-IN WEB SERVER

For remote access and touch-free control, simply use a web browser on a PC or mobile device connected to the same network as the SCT-2200. Monitor weight data and perform calibrations without being in the same physical location or pressing any buttons on the SCT-2200 itself for added convenience and safety.

SCT-2200 Signal Conditioning Transmitter Specifications

Power:
12/24 VDC

Power Consumption:
70 mA min to 100 mA max

Excitation Voltage:
5 VDC, 120 mA, 8 × 350 ohm load cells

Analog Signal Input Range:
± 39 mV

Analog Signal Sensitivity:
0.3 μV/graduation minimum

A/D Sample Rate:
One channel A/D 24-bit sigma-delta conversion, up to 200 conv/sec. auto select

Resolution:
Internal: 1,500,000 counts
Display: 800,000

Digital I/O:
Two inputs: 12/24 VDC
Two outputs: 150 mA 48 VAC/150 mA 60 VDC

Communication Ports:
(1) RS-485, (1) RS-232
Analog output (if equipped):
Opt isolated, 16-bit
0-20mA, 4-20mA (Maximum 350 ohm)
0-5VDC, 0-10VDC (Minimum 10,000 ohm)

Annunciators:
Net, center of zero, stability

Display:
Six-digit 0.31 in (8 mm), red LED

Keys/Buttons:
Five key, tactile feel
Zero (Down), Tare (Up), Mode (Right), Print (Enter), C (On/Off)

Dimensions:
(L × H × D)
4.72 × 4.52 × 0.98 in
(120 × 115 × 25 mm)

Temperature:
Certified: 14 °F to 104 °F (-10 °C to 40 °C)
Operating: 14 °F to 122 °F (-10 °C to 50 °C)

Humidity:
85% non-condensing

Rating/Material:
NEMA Type 1 plastic pluggable connectors

Weight:
1 lb (0.5 kg)

Warranty:
One-year limited

Approvals:
NTEP 20-046
Measurement Canada AM-6165C
OIML R76/2006-A-GB1-19.17
UKCA Marked
cULus Listed

Parts

Part #	Description
Transmitters
202103	Indicator,SCT2200 12-24VDC,and RS485/232 Serial Port, DIN Mount, Regulatory Modes.
202104	Indicator,SCT2200-AN Analog Output, 12-24VDC, and RS485/232 Serial Port DIN Mount Regulatory Modes.
Fieldbus
182592	Fieldbus,SCT2200,Profinet 12-24VDC, RS485 Connection and ProfiNet output DIN Mount
194343	Fieldbus,SCT2200, WIFI 12-24VDC, RS485 Connection and WiFi and TCP/IP Output DIN Mount
182593	Fieldbus,SCT2200,Profibus 12-24VDC, RS485 Connection and Profibus output DIN Mount (SCT-2200 Only)
212772	Fieldbus,SCT2200,Profibus 12-24VDC, RS485 Connection and Profibus output DIN mount (682 Only)
182591	Fieldbus,SCT2200, E/IP 12-24VDC, RS485 Connection and Ethernet/IP output DIN Mount
182596	Fieldbus,SCT2200,Dev.Net 12-24VDC, RS485 Connection and DeviceNet output DIN Mount
182598	Fieldbus,SCT2200,Ethercat 12-24VDC, RS485 Connection and Ethercat output DIN Mount
182597	Fieldbus,SCT2200,CANOPEN 12-24VDC, RS485 Connection and CANOPEN output DIN Mount
196694	Fieldbus,SCT2200, Modbus 12-24VDC, RS485 Connection and Modbus TCP output DIN Mount
182599	Cable,RS485 Network Connection Cable for Fieldbus, 150mm long, w/RJ45, DIN Mount

Options

Part #	Description

88792	Power Supply,IDEC 12VDC DIN Rail Mount, 1.3 Amp, Input: 85 to 264 VAC, 100 to 370 VDC 15W
119244	Power Supply,24VDC 1.3A Din Mount Input 90 to 264VAC,120 to 370VDC, UL E135494