SCT-30 Signal Conditioning Transmitter

As of: Friday, July 11, 2025

Save or Print to PDF

Standard Features

LCD display
Powers up to eight (350 ohm) load cells in parallel (with a 24-bit A/D converter)
A/D converter 24-bit 4.8 kHz
16-bit analog output: 0-20 mA, 4-20 mA, 0-5 V, 0-10 V, ±5 V, and ±10 V
Mounting on Omega/DIN rail for back panel or junction box
Diagnostic message for load cell disconnect and over-capacity errors

Approvals

WARNING: Cancer and Reproductive Harm California Proposition 65

DIN-rail Mountable Digital Weight Transmitter

The SCT-30 is a DIN-rail mountable solution held in a cabinet or control panel to convert load cell signals to analog output. With a digital rotary for zero, tare and setpoint entry, this weight transmitter is simple to setup, calibrate and operate.

SCT-30 Signal Conditioning Transmitter Specifications

Power:
Input: 12 to 24 VDC

Power Consumption:
3 W

Excitation Voltage:
5 VDC, 120 mA, 8 × 350 ohm load cells

Analog Signal Input Range:
± 39 mV

Analog Signal Sensitivity:
0.3 μV/graduation minimum
1.0 μV/graduation recommended

A/D Sample Rate:
300 Hz

Resolution:
Internal: 16,000,000 counts

System Linearity:
± 0.01% full scale

Communication Ports:
RS-485

Analog Output:
Opto isolated, 16 bit
0-20 mA, 4-20 mA (max 300 ohm)
0-10 VDC, 0-5 VDC (min 10 k ohm)

Display:
Eight-digit alphanumeric tow line LCD, 5 mm high

Keys/Buttons:
Control knob and DIP switches

Dimensions:
(L × W × H)
3.74 × 3.54 × 2.36 in
(95 × 90 × 60 mm)

Temperature:
Operating: -4 °F to 140 °F (-20 °C to 60 °C)

Humidity:
85% non-condensing

Rating/Material:
DIN rail mount: NEMA Type 1

Weight:
1 lb (0.5 kg)

Warranty:
One-year limited

Approval:
cULus Recognized

Parts

Part #	Description

156794	Indicator,SCT30 SCT30-AN, 12-24VDC, Analog Output, and RS485 Serial Port DIN Mount, Displays mV and Analog Output Signal Only. Does Not Display Weight.
156834	Indicator,SCT30 SCT30-AN, Enclosed in a Plastic Junction Box, 12-24VDC, Analog Output and RS485 Serial Port.

Options

Part #	Description

88792	Power Supply,IDEC 12VDC DIN Rail Mount, 1.3 Amp, Input: 85 to 264 VAC, 100 to 370 VDC 15W
119244	Power Supply,24VDC 1.3A Din Mount Input 90 to 264VAC,120 to 370VDC, UL E135494
131129	Lit,Manual SCT 10 Series Sct Weight Transmitter
199707	End Clamp, Left and Right set with Clip for DIN 35 Rail for SCT-40