NOTICE OF SOFTWARE RELEASE: 882D CPU Firmware v2.05.02 Checksum 2953
02/18/2026

•	Analog Output – Blue analog output cards no longer crash the indicator after boot 
•	Analog Output – Full scale and hold error actions are no longer reversed


NOTICE OF SOFTWARE RELEASE: 882D CPU Firmware v2.05.01 Checksum 01FB
01/22/2025

•       PLC Speed Input – Only default setpoint 20 on exit config if it’s not set for kind SPEED
•	Calibration – PLC – Span calibration continues even if the speed value is set to 0
•	Calibration – Span calibrations appear to continue even if a belt running input is active
•	Speed Error Messaging – Incorrect error generated
•	Speed input error message shown in the menu


NOTICE OF SOFTWARE RELEASE: 882D CPU Firmware v2.05.00 Checksum ABF5
04/25/2024

•       Speed – Add the ability to specify the belt speed from a PLC


NOTICE OF SOFTWARE RELEASE: 882D CPU Firmware v2.04.02 Checksum BDBE
06/20/2023

•       Totalizer Pulse – Fix menu to allow that selection for a relay card


NOTICE OF SOFTWARE RELEASE: 882D CPU Firmware v2.04.01 Checksum 9592
08/04/2022

•	iRite string memory data can show up on the display
•	Ethernet line termination not following configuration
•	Dead band parameter value is not being defaulted during a reset
•	Dynamic span calibration type is not being defaulted during a reset


NOTICE OF SOFTWARE RELEASE: 882D CPU Firmware v2.04.00 Checksum 68D1
07/12/2022

• 	EDP.PORT command has incorrect port numbers for Ethernet Server and Client
•	iRite – Port X Char Received handler not working with ethernet client or server
•	Ethernet – Client and server numbering are incorrect for iRite
•	Totalizer pulse output – clearing the master totalizer will disable the pulse output


NOTICE OF SOFTWARE RELEASE: 882D CPU Firmware v2.03.03 Checksum F87D
12/23/2021

• 	Dynamic span calibration with test weight – reported error is incorrect
• 	Speed sensor diameter – range is too small for metric