NOTICE OF SOFTWARE RELEASE: CLS680 Firmware v1.04.04
02/24/2026

Non-Legally Relevant Changes:
•	Add parameter LOWBATIND to allow the user to choose whether or not they receive messages about their battery being low. Defaults to ON
•       Change the low battery message to only appear once every 30 minutes
•       Modify modes 602, 604, and 605 to set LOWBATIND to be OFF


NOTICE OF SOFTWARE RELEASE: CLS680 Firmware v1.04.03
02/06/2024

Non-Legally Relevant Changes:
•	Mode 602’s streaming output does not mimic the line terminator from JBox


NOTICE OF SOFTWARE RELEASE: CLS680 Firmware v1.04.02
09/14/2023

Non-Legally Relevant Changes:
•	Viewing the mode in the menu without editing still enforces the mode change


NOTICE OF SOFTWARE RELEASE: CLS680 Firmware v1.04.01
07/11/2023

Non-Legally Relevant Changes:
• 	Mode 602 changes – EDP.TERMIN, WIFIBT.ENABLE=WIFI
• 	Mode 603 changes – Pipe output missing at the end of the frame


NOTICE OF SOFTWARE RELEASE: CLS680 Firmware v1.04.00
07/07/2023

Non-Legally Relevant Changes:
• 	Mode 602 changes – EDP.INPUT, EDP.TERMIN, WIFIBT.ENABLE=BT
• 	Mode 603 changes – replicate FMT4 on CLS-IM
• 	Mode 602 correctly reports angle and CRC data
• 	Mode 602, 604, 605 – Streaming output not matching custom 
• 	Fetch weigh commands GG/XT/XN not working 
• 	KDISPTARE shows a blank screen
• 	SC.X.X#1 commands causing errors on comm ports 
• 	Menu/Tare – The user menu display tare function is not working 

NOTICE OF SOFTWARE RELEASE: CLS680 Firmware v1.03.00
11/23/2022

•	Corrected issues with Mode 602 stream output
•	EDP – Correct an issue with DUMPAUDIT command
•	EDP – Add MODELOCK command
•	Accumulator issues
•	EDP – Corrected issues with SX command
•	Streaming – Stream format status, mode, and units not auto changing
•	Menu – Battery status reported incorrectly
•	Printing – Issue with <G> token
•	Display – incorrect weights in secondary
•	Streaming – Not showing negative sign in the streamed outputs if using secondary
•	EDP – Weight responses are incomplete if they take up too many characters
•	Menu – Time and date menu bug
•	JBox – Add JBox firmware number to the DUMPALL response
•	EDP – Keyboard lock parameter does not work
•	Display – When JBox is in an error state, show ANGLE not dashes on the display
•	Menu – Show JBox UID in the indicator menu
•	JBox – Offer JBox reset from the CLS680 menu
•	JBox – Add support for Mode 611